Questions REf Stabilant 22 and Seal Install | FerrariChat
Buy

Questions REf Stabilant 22 and Seal Install

Discussion in 'Technical Q&A' started by 50hdmc, Feb 5, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 50hdmc

    50hdmc Formula 3

    Oct 10, 2006
    1,211
    Michigan
    Full Name:
    mark s
    #1 50hdmc, Feb 5, 2009
    ......a couple of questions as I work on my 30k maintenance. I purchased a tube of stabilant 22 and now find a thread that seems to indicate that many on the forum feel it is better to just clean the connections - that stabilant 22 causes more problems. I wondering if that is the latest conclusion of the group.

    Secondly, I need to replace the seal after finding a bad bearing supporting the main drive pulley. When I pulled the old seal (pulled it out by hand, very loose), I didn't find another rubber washer or O ring. I see in the exploded view that there is the concave metal seal and when I ordered from Ricambi, I received a green thin rubber seal too. Does this sound right to you guys - I mean as that all there is (mine was missing the thin rubber O ring). Sorry, but I searched for info in the replacement and couldn't find a thread.....

    thanks for your help "brothers" - you are the BEST...AND with your help, this car might even run again!!
    mark
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,931
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #2 Steve Magnusson, Feb 5, 2009
    What year/model/version F?

    If you are talking about the seals down on the cam drive sprocket shafts on a 308 there are two different designs -- but post the link to (or the picture of) the Ricambi spare parts page that you are talking about, and it would be a lot easier to discuss using the item numbers to identify the various parts in question.
     

Share This Page