Quick MAF question for a 456 | FerrariChat

Quick MAF question for a 456

Discussion in '456/550/575' started by AZFerrari456, Sep 1, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. AZFerrari456

    AZFerrari456 Rookie

    Joined:
    Dec 8, 2022
    Messages:
    4
    Full Name:
    Louis
    Good morning everyone,

    I had a quick question....I suspect that my driver side MAF is bad on my car. As you all know getting the original part is quite difficult for a 456. From what I have read and researched it seems as though the Bosch MAF on a Volvo 960 is a cross reference part for the 456 but was wondering if anyone can confirm? The original Bosch part number on the MAF for the 456 is 0280217521.....the Bosch part number for the Volvo is 0280218417 and visually looks the same and is much more reasonably priced....any help is greatly appreciated. Thanks.
     
  2. rviani

    rviani Karting

    Joined:
    Jun 22, 2005
    Messages:
    81
    Location:
    NJ
    Full Name:
    Ron Viani
    The Bosch part # on the MAF sensor on my 95 456GT is 0280213021 which equates to a part for a 93 - 94 VW Pssat 2.8L v6. Anyone on here tried this replacement?
     
  3. scowman

    scowman F1 Rookie

    Joined:
    Mar 25, 2014
    Messages:
    2,550
    Location:
    Scottsdale AZ
    Full Name:
    Stu Boogie
  4. rviani

    rviani Karting

    Joined:
    Jun 22, 2005
    Messages:
    81
    Location:
    NJ
    Full Name:
    Ron Viani
    My mistake - part number is 0280213012 NOT 3021 as above. Compatible with 92 -94 Volvo 960
     
  5. rviani

    rviani Karting

    Joined:
    Jun 22, 2005
    Messages:
    81
    Location:
    NJ
    Full Name:
    Ron Viani
    Additional clarification. It appears the Ferrari part #162530 crosses with Bosch 0280217521 and applies to cars with the Bosch 5.2 Motronic. The early 456 with 2.7 Motronic (as above) takes Ferrari part #154916 which crosses to Bosch 0280213012. These my be interchangeable but I believe the connectors are different.
     
  6. scowman

    scowman F1 Rookie

    Joined:
    Mar 25, 2014
    Messages:
    2,550
    Location:
    Scottsdale AZ
    Full Name:
    Stu Boogie
    The ones I posted above fit my 2.7 motronic.
     

Share This Page