Quick Release Steering Wheel | FerrariChat

Quick Release Steering Wheel

Discussion in 'Technical Q&A' started by hanknum, Jul 29, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. hanknum

    hanknum Formula 3

    Nov 1, 2003
    2,050
    Santa Barbara
    Full Name:
    Henry
    #1 hanknum, Jul 29, 2005
    Last edited by a moderator: Sep 7, 2017
    I got this QR mechanism from a friend and decided to give it a try. Amazingly it works great. The whole thing is about an inch thick, which is nice since it brings the wheel closer to you. It's not too thick though, that you would have to reach for the turn signal lever. It bolts on where the 6 bolts fit on the steering wheel. It retains use of the horn and does not have any slop at all. The two halves mate together and then a lock ring turns about 1/4 turn and locks into place. This also makes ingress and egress easier. I know it's not totally necessary, but cool little toy. Also, it can all go back to stock.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     

Share This Page