QV Timing Belt Cam Locks | FerrariChat

QV Timing Belt Cam Locks

Discussion in '308/328' started by marcro, Dec 6, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. marcro

    marcro Karting

    Joined:
    Oct 25, 2007
    Messages:
    68
    Location:
    Canada
    Full Name:
    Mark Cross
    Does anyone make a set of cam locks for doing the belt changes on a QV? Birdmans contact the last time I emailed him only had a set avialble for the 2V which has a wider space behind the cam gears and it wont work on my QV.

    I could make my own I guess out of wood but would really like a proper set for the tool box.

    Has anyone made up drawings for the wooden set if I have to go that route?
     
    marcro, Dec 6, 2012
    #1
  2. tatcat

    tatcat F1 World Champ Owner Silver Subscribed

    Joined:
    Sep 3, 2001
    Messages:
    11,013
    Location:
    panama city beach FL
    Full Name:
    rick c
    there really is much made about this simple object.
    i made mine from an old 3/8" thick teflon cutting board and a screw.
    just cut the board to the width of the gear and the distance between the two cams.
    one for the top, one for the bottom.
    hold a straight edge and mark where the screw will pass through then drill.
     
    tatcat, Dec 6, 2012
    #2
  3. Brian Harper

    Brian Harper F1 Rookie Owner Silver Subscribed

    Joined:
    Feb 17, 2006
    Messages:
    4,078
    Location:
    San Jose area
    Full Name:
    Brian Harper
    Tatcat is right. No magic here. I took a scrap of wood and spent 15 seconds on the bandsaw to make a couple of wedges and used a wood screw to clamp them together.
     
    Brian Harper, Dec 7, 2012
    #3
  4. NW328GTS

    NW328GTS Formula 3

    Joined:
    Nov 16, 2009
    Messages:
    2,191
    Location:
    Washington
    Full Name:
    Hal
    Last edited by a moderator: Sep 7, 2017
    NW328GTS, Dec 7, 2012
    #4

Share This Page