355 Race Technologies: Brembo GT Big Brake kit. 4-pot/355mm all around. Now or never.

Thanks. Would these work with the stock wheels or only challenging wheels?

also, looks like that kit only goes larger on the front. Maintains the smaller size in the rears. Was hoping to do the larger size both front and back but not sure if it’s possible to do that and maintain the E brake

 

@INTMD8 would you mind showing me your set up?

 

I haven’t tried to fit my 17” factory wheels on them. Don’t think they will fit.
As far as bigger rears I don’t think you will need more braking power with these. And they look good and fill the rear wheels very nicely. Plus the setup is lighter than factory stuff.

 

is it possible to fit the OEM 355 challenge/F40 calipers to the rotors from that kit? i.e. on the 2-piece 355mm front/335mm rears?

 

I modified some Wilwood parts but it was more work than anyone would really want to do. (I don't recommend doing it)

https://www.ferrarichat.com/forum/posts/150056610/