360 - Rear ARB Bush Inner Diameter | FerrariChat

360 Rear ARB Bush Inner Diameter

Discussion in '360/430' started by Sundayjumper, Jun 19, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Sundayjumper

    Sundayjumper Karting

    Jun 19, 2019
    102
    Berkshire
    Full Name:
    Steve
    I've been away a while. Can someone confirm the correct ID for the rear ARB bush on the non-splined side ? I bought a non-OEM replacement from a UK-based performance Ferrari parts specialist and it was too big. I let them know and they were confused but super helpful and immediately sent me a replacement no question. The replacement is still too big. Exactly the same as the first one.

    The original bush from my car - a 2000 with over 80k miles - measures just under 26mm. The brand new replacement is almost 27mm. The original still fits "OK" but is obviously worn. The new ones rattle around with about a millimetre of clearance.

    I let them know about this two days ago and have not had a response yet...


    Top: original
    Bottom right: first attempt, fitted & driven about 15 miles
    Bottom left: second attempt, not been fitted


    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. Sundayjumper

    Sundayjumper Karting

    Jun 19, 2019
    102
    Berkshire
    Full Name:
    Steve
    Anyone ?

    Superformance are telling me they've checked with other customers who have bought these ~27mm bushes and they’ve all confirmed no issues.
     

Share This Page