Rear hub nut | FerrariChat

Rear hub nut

Discussion in '308/328' started by mixedgas, Sep 3, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. mixedgas

    mixedgas Formula Junior Silver Subscribed

    Joined:
    Apr 23, 2019
    Messages:
    263
    Location:
    Ramona, CA
    Full Name:
    Mike
    Good morning, I'm preparing to service my rear hubs and wondered if anyone could please tell what size socket fits this nut? Also are there any tips for undoing the locking "dimples" before I make a mess of things with a cold chisel? Thanks, Mike
    Image Unavailable, Please Login
     
    mixedgas, Sep 3, 2024
    #1
  2. Rifledriver

    Rifledriver Three Time F1 World Champ

    Joined:
    Apr 29, 2004
    Messages:
    37,089
    Location:
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    Ignore the peening. It really does little if any anyway. A 1/2 inch airgun won't care.
     
    Rifledriver, Sep 3, 2024
    #2
    mixedgas likes this.
  3. mixedgas

    mixedgas Formula Junior Silver Subscribed

    Joined:
    Apr 23, 2019
    Messages:
    263
    Location:
    Ramona, CA
    Full Name:
    Mike
    Thank you, it seems that is a 44 mm ring nut
     
    mixedgas, Sep 3, 2024
    #3

Share This Page