Rear License Plate Screws

Tried searching and haven't hit any good answers...

What size Screws would this Rear License Plate Bracket Take?

Thanks in Advance
Image Unavailable, Please Login

 

Just a few screw sizes (metric?) and see what fits... Don't force them in!

 

Should be an M6 x 1.0 thread pitch. Available at True Value Hardware in their bolt bins sold by the piece. Cheapest Ferrari part you will buy this year

 

Whatever the size try to get a4 or at least a2 ..These screws tend to corode easily especially if driving in rain etc

Sent from my Moto G (4) using Tapatalk

 

McMaster has stainless ones in any head you want. Here are the Phillips head versions.

https://www.mcmaster.com/#metric-stainless-steel-machine-screws/=16r6rt0

 

Self Tapping Flanged Button Screws m4x10 - get Stainless steel a2 or a4

Should be able to find locally

This is what is on the 430 scuderia - not sure if all had the same - I know that with other screws on these cars it can change from year to year sometimes
Image Unavailable, Please Login

 

I just went back and saw you have a 430 spider

Those screws according to Ricambi are m5x16 machine screws - I dont have pictures of that screw

Sorry if I caused any confusion

 

I meant to say self tapping screws -

 

I Bought a kit that was for imports that had
"Includes Machine screws thread size: (4) M5x10, (4) M5x20, (4) M6x12, (4) M6x20
Self-tapping screws thread size: (4) M5x16, (4) M6x20 + "

None of these worked... Didn't try the self tapping tho. There is threads already in there.
The self taping wont wear out what was previously in there?

 

If a self taping screw was indeed used and based on research tgat what was used ...A new screw should just go in without any force ...Try the m5 x16 and see if it goes in smoothly

Sent from my Moto G (4) using Tapatalk