Rear tranny seal | FerrariChat
Buy

Rear tranny seal

Discussion in '365 GT4 2+2/400/412' started by Godspeed!, Jul 12, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Godspeed!

    Godspeed! Karting

    Dec 1, 2006
    137
    Mandeville, Louisian
    Full Name:
    Dave Foley
    #1 Godspeed!, Jul 12, 2012
    Hate to have to ask this................ My newly detailed, rebuilt, installed TH 400 is leaking fluid from the rear seal. Probably incorrect seal installed by rebuilder, but question is twofold.

    Has anyone pulled the diff and torque tube, replaced the rear seal? Any correct seal dimensions available?

    Thanks in advance...........

    Godspeed!
    Dave
     
  2. dstacy

    dstacy F1 World Champ
    Owner Rossa Subscribed

    Jan 23, 2006
    11,998
    GMT -5 & GMT +1
    Full Name:
    Dave
    #2 dstacy, Jul 12, 2012
    You can pull the diff and tube. It isn't fun, but you can do it.
     
  3. jacques

    jacques Formula Junior

    May 23, 2006
    877
    Los Angeles/Florida
    #3 jacques, Jul 14, 2012
    Be sure to inspect the bearing in the torque tube..if it is frozen/corroded, the resistance will force the tranny to eat itself alive..that may be the initial cause of the seal leak..remember, in my previous posts on this subject, the immobile tube/propeller shaft bearing caused my tranny pump to absolutely destroy itself..Jacques.
     
  4. Godspeed!

    Godspeed! Karting

    Dec 1, 2006
    137
    Mandeville, Louisian
    Full Name:
    Dave Foley
    #4 Godspeed!, Jul 21, 2012
    Geesh thanks.........
     

Share This Page