Rear window seal supplier | FerrariChat

Rear window seal supplier

Discussion in '308/328' started by snowsports1, Aug 22, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. snowsports1

    snowsports1 Formula Junior

    Jan 31, 2013
    918
    UK
    Full Name:
    Brian
    Hi does anyone have or know where I can get a reasonable priced rear window seal? I actually need 2 and don't really want to pay £300 each from Marenello Classic. One is for a race car with Lexan rear window. Thanks
     
  2. Crowndog

    Crowndog F1 Veteran

    Jul 16, 2011
    7,042
    Fairfield,Pa
    Full Name:
    Robert
    It looks like Superperformance.uk has it for much cheaper.


    Sent from my iPhone using Tapatalk
     
  3. snowsports1

    snowsports1 Formula Junior

    Jan 31, 2013
    918
    UK
    Full Name:
    Brian
    Great spot thanks, I don't remember seeing that on their website before


    Sent from my iPhone using Tapatalk
     
  4. godabitibi

    godabitibi F1 Veteran

    Jan 11, 2012
    6,329
    Papineauville, Quebec
    Full Name:
    Claude Laforest
    Do you really need a seal? My car has NO seal. It's in place with silicone from the factory.
     
  5. sp1der

    sp1der F1 Rookie

    Jan 10, 2009
    3,007
    UK
    Full Name:
    Simon Ashley
    Glass cars were bonded and I think the change to the rubber seal came with the steel cars. I have put a seal in my glass car but it was a very time consuming job to get it to fit as the roof panel and glass are not exactly a great match shape wise.
     
  6. greg288

    greg288 Karting

    May 28, 2007
    203
    My '77 GTB is a steel car and was still glued in....fwiw.
     
  7. snowsports1

    snowsports1 Formula Junior

    Jan 31, 2013
    918
    UK
    Full Name:
    Brian
    There's a trim though, without the trim it will probably look a mess?


    Sent from my iPhone using Tapatalk
     
  8. sp1der

    sp1der F1 Rookie

    Jan 10, 2009
    3,007
    UK
    Full Name:
    Simon Ashley
    #8 sp1der, Aug 23, 2016
    Last edited by a moderator: Sep 7, 2017
  9. godabitibi

    godabitibi F1 Veteran

    Jan 11, 2012
    6,329
    Papineauville, Quebec
    Full Name:
    Claude Laforest
    Yes the bonded has a trim. BTW mine is a 77 steel not a glass car but I wish it was.
     
  10. snowsports1

    snowsports1 Formula Junior

    Jan 31, 2013
    918
    UK
    Full Name:
    Brian
    mine is a steel car without trim so if I bond it it will look a mess, I have ordered two seals from superformance now thanks


    Sent from my iPhone using Tapatalk
     
  11. Jonny Law

    Jonny Law F1 Rookie
    Silver Subscribed

    May 6, 2008
    3,203
    Over yonder.
    Full Name:
    IT Guy

Share This Page