Rebuilding a defective Dinoplex AEC103A | FerrariChat
Buy

Rebuilding a defective Dinoplex AEC103A

Discussion in '365 GT4 2+2/400/412' started by alhbln, Mar 5, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. alhbln

    alhbln Formula 3
    Consultant Owner

    Mar 4, 2008
    1,749
    Berlin, Germany
    Full Name:
    Adrian
    #1 alhbln, Mar 5, 2010
    I have posted a preview for an article describing the rebuild of a defective Dinoplex AEC103A (and AEC101C) in the 206/246 section, this might also be of interest for the 365GT4 owners here:

    http://www.ferrarichat.com/forum/showthread.php?t=276251

    Please add comments etc. in the 206/246 post, thank you :)

    For owners of later cars with a Dinoplex AEC104B/BK/BW, including the 400i, a plug and play MSD 6AL-2 based setup can be found in the AEC104A section on www.dinoplex.org)
     

Share This Page