Relay Board Help | FerrariChat
Buy

Relay Board Help

Discussion in '308/328' started by BLR308, May 19, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BLR308

    BLR308 Rookie

    Jun 21, 2013
    49
    Papillion, NE
    Full Name:
    Bob Roegge
    #1 BLR308, May 19, 2014
    Last edited by a moderator: Sep 7, 2017
    Need some help with correct mounting of the relay board. My 83 Euro QV's relay board is not attached to the dash frame. Looking at some pictures in other threads it appears that it should hang on three standoffs. My wiring bundle also looks like it would interfere with installing standoffs. Note in the picture there are no holes where standoffs might have previously been attached. Thoughts - advice.
    Image Unavailable, Please Login
     
  2. dflett

    dflett Formula 3
    Silver Subscribed

    Jun 24, 2005
    1,632
    NY
    Full Name:
    David
    #2 dflett, May 19, 2014
    Last edited by a moderator: Sep 7, 2017
    If it helps any here's a photo of mine from a US 78. Your wiring bundle should be lower by the looks of things. Maybe Euros/QVs were different?

    David
    Image Unavailable, Please Login
     
  3. Todd308TR

    Todd308TR F1 World Champ

    Nov 25, 2010
    11,074
    LA
    Full Name:
    Todd
    #3 Todd308TR, May 19, 2014
    Looks like you're missing a back plate, is there hole behind that wire bundle?
     
  4. ME308

    ME308 Formula 3

    Nov 5, 2003
    1,550
    Munich, Germany
    Full Name:
    Michael
    #4 ME308, May 19, 2014
    Last edited by a moderator: Sep 7, 2017
    yes, you`re missing the frame for the relay panel -
    you probably have to make up something since I`ve never seen that part beeing available anywhere

    see on mine how it should look
    .
    Image Unavailable, Please Login
     
  5. BLR308

    BLR308 Rookie

    Jun 21, 2013
    49
    Papillion, NE
    Full Name:
    Bob Roegge
    #5 BLR308, May 19, 2014
    Replies help a lot.......thanks. Now that I know what it looks like I can fabricate one. Suspect it was a casualty of the "federalization" as they added a seat belt light in the fuse/relay cover. It protrudes into relay board space. My guess is they measured badly and compensated by just letting the cover hold up the relay board.
     

Share This Page