remove part no. 108332 | FerrariChat

remove part no. 108332

Discussion in 'Boxers/TR/M' started by turbo-joe, Jul 15, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    8,912
    southwest germany and thailand
    Full Name:
    romano schwabel
    #1 turbo-joe, Jul 15, 2019
    just doing a major and also like to get plated several parts. so I wanted to remove the "terminale per sede candela" but had problem to get them out. so after I got advice from paul newman I made a special tool and it was even with this tool not so easy to remove those parts but they came out :)

    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. vincenzo

    vincenzo F1 Rookie

    Nov 2, 2003
    3,373
    #2 vincenzo, Jul 15, 2019
    Plug terminal?

    What is it? I don’t recognize the part.
     
  3. Newman

    Newman F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 26, 2001
    14,144
    Canada
    Full Name:
    Newman
    #3 Newman, Jul 15, 2019
    Spark plug tube.

    Good job. They’re held in with loctite
     
    vincenzo likes this.
  4. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    8,912
    southwest germany and thailand
    Full Name:
    romano schwabel
    #4 turbo-joe, Jul 15, 2019
    have not known that they have been in with loctite, that was the reason I had problem first to get them out and I did not want to damage them.
    today glas blasting and then to new plating with a lot of other parts
     
  5. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    8,912
    southwest germany and thailand
    Full Name:
    romano schwabel
    #5 turbo-joe, Jul 16, 2019
    on those comes the black rubber boot that no water may go inside down to the sparkplug
     
  6. pshoejberg

    pshoejberg Formula 3
    Silver Subscribed

    Dec 22, 2007
    1,694
    Denmark
    Full Name:
    Peter H
    #6 pshoejberg, Jul 16, 2019
    Excellent write up, thanks. That job is up on my do do list this fall, so nice to have some inspiration.

    Best

    Peter
     
  7. xplodee

    xplodee Formula 3

    Jan 3, 2017
    1,101
    Allentown, PA
    Full Name:
    Tim
    #7 xplodee, Jul 16, 2019
    Please post pics when you're done with the install so we can see how it all looks!
     
  8. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    8,912
    southwest germany and thailand
    Full Name:
    romano schwabel
    #8 turbo-joe, Jul 16, 2019
    this will take some time, may be 3 weeks?
     
  9. Ludwig

    Ludwig Formula Junior

    Mar 27, 2006
    307
    Redmond WA
    Full Name:
    Ludwig Allegra
    #9 Ludwig, Jul 19, 2019
    turbo-joe likes this.
  10. Newman

    Newman F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 26, 2001
    14,144
    Canada
    Full Name:
    Newman
    #10 Newman, Jul 19, 2019
    New exhaust valves?
     
  11. Ludwig

    Ludwig Formula Junior

    Mar 27, 2006
    307
    Redmond WA
    Full Name:
    Ludwig Allegra
    #11 Ludwig, Jul 22, 2019
    These were new at prior rebuild that I did not do. About 2000 mi on the engine from that "rebuild" -new pistons valves bearings and 1 liner at that time.
    The valves all looked great as were the guides. Just new seals and basic valve job.
     

Share This Page