Removing air inj fittings from manifold | FerrariChat
Buy

Removing air inj fittings from manifold

Discussion in 'Technical Q&A' started by docmirror, Jul 21, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. docmirror

    docmirror Formula Junior

    May 6, 2004
    781
    Ft Worth TX
    #1 docmirror, Jul 21, 2007
    I have a Mondial, and would like to remove my air pump and also the fittings from the exhaust manifold. AFAIK, they've been in since new in '83. pump and belt are not an issue, I'm worried about the fittings in the manifold.

    suggestions?
     
  2. Brian Harper

    Brian Harper F1 Rookie
    Owner Silver Subscribed

    Feb 17, 2006
    4,078
    San Jose area
    Full Name:
    Brian Harper
    #2 Brian Harper, Jul 21, 2007
  3. tomberlin

    tomberlin Formula Junior
    Silver Subscribed

    Apr 9, 2005
    850
    Bethesda
    Full Name:
    tom berlin
    #3 tomberlin, Jul 22, 2007
    Toyota caliper bracket bolts shortened to correct length. Lock-tite in place.
    Cheers
    Tom
     
  4. docmirror

    docmirror Formula Junior

    May 6, 2004
    781
    Ft Worth TX
    #4 docmirror, Jul 22, 2007
    Any particular model of Toyota? Perhaps they're all the same, but I think between the Corolla, and the Tundra they might be different bolts.

    Thanks
     
  5. tomberlin

    tomberlin Formula Junior
    Silver Subscribed

    Apr 9, 2005
    850
    Bethesda
    Full Name:
    tom berlin
    #5 tomberlin, Jul 22, 2007
    I can find out for certain, but I believe Camry/Avalon/small pick-up are the same thread.
    Tom
     

Share This Page