Removing F430 Emergency Fuel Door Release Knob | FerrariChat

Removing F430 Emergency Fuel Door Release Knob

Discussion in 'Technical Q&A' started by gaxor, Dec 22, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. gaxor

    gaxor Rookie

    Jul 19, 2017
    27
    Surrey - UK
    Hi

    I am just about to fit carbon fibre engine bay panels, and was wondering if anyone can quickly advise me how to remove the T-handle on the end of the fuel door release cable in the engine bay.

    Gary
     
    chenglo1 likes this.
  2. rfwf430

    rfwf430 Rookie

    Nov 3, 2013
    28
    Englewood, CO
    There should be a small u-shaped silver colored pin that enters from the round part of the handle and slides over the cable. Take a small sharp pointed awl and pry it out about half way and the handle should slide off the solid pin on the end of the cable that the pin prevents the handle from coming off the cable. Hope this helps.
     
    Ricambi America likes this.
  3. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    chenglo1 and Qavion like this.
  4. gaxor

    gaxor Rookie

    Jul 19, 2017
    27
    Surrey - UK
    Got it - Thanks
     
  5. bzubi

    bzubi Karting

    May 7, 2007
    136
    NOVA
    Full Name:
    Bashar Zubi
  6. parkem

    parkem Karting

    Feb 17, 2012
    160
    florida
    Full Name:
    peter palermo
    take it all the way out
     
  7. bzubi

    bzubi Karting

    May 7, 2007
    136
    NOVA
    Full Name:
    Bashar Zubi
    Yes, I figured I had to do that when I peered into it with a flash light. I am missing the part that keeps the other side from falling off.

    Thank for the response though; much appreciated.
     
  8. 338Lapua

    338Lapua Formula Junior

    Sep 5, 2015
    802
    Michigan
    Full Name:
    Tony
    There is a small e-clip that keeps the cable attached to the engine panel. Your local hardware should have one.
     

Share This Page