Removing the seats in 84 308QV | FerrariChat
Buy

Removing the seats in 84 308QV

Discussion in '308/328' started by John J., Oct 31, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. John J.

    John J. Karting

    Sep 4, 2007
    86
    South West England
    #1 John J., Oct 31, 2007
    Just about to clean and condition the seats but think I can do a much better job by taking them out of the car. I understand that each seat is held in by 4 allen bolts that can be accessed by sliding them back and forth. I read somewhere though that there is a fuel pump kill switch under the drivers seat! Is this right and if so is it easy to remove from the seat?

    Cheers
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,826
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #2 Steve Magnusson, Oct 31, 2007
    That seat switch for the fuel pump is only used on the carbed 308 -- no seat switch on your injected 308QV.
     
  3. John J.

    John J. Karting

    Sep 4, 2007
    86
    South West England
    #3 John J., Oct 31, 2007
    Thanks :)
     
  4. Mike C

    Mike C F1 Veteran
    Lifetime Rossa Owner

    Aug 3, 2002
    6,081
    Southeast USA
    Full Name:
    Mike Charness
    #4 Mike C, Oct 31, 2007
    Should take you about 10 minutes or less to remove the seat. Use a 6mm allen to remove the front bolts first, then slide the seat all the way forward on the rails and remove the rear two. Then the seat will pull right out. If you have a targa car, it's much easier if you take the top out first.
     

Share This Page