Replacing 246 dino Headlight | FerrariChat
Buy

Replacing 246 dino Headlight

Discussion in 'Technical Q&A' started by melpacino, Nov 16, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. melpacino

    melpacino Karting

    Nov 16, 2008
    95
    Los Angeles
    Full Name:
    Mel Bahri
    #1 melpacino, Nov 16, 2008
    Hi, would some one please let me know how to get access to the back of the headlight on a 246 dino? I just got the car and the last owner replaced the headlights but connected the wires wrong so when I turn on the lights one light is high beam and the other is low. I just need to get access to the back of the light and switch the wires. Thank you in advance. Mel
     
  2. FandLcars

    FandLcars F1 Rookie

    Aug 6, 2006
    3,057
    Tempe, Az
    Full Name:
    Rick Schumm
    #2 FandLcars, Nov 16, 2008
    Welcome to Ferrarichat! If you haven't already posted your question in the 206/246 Forum, that would be a good idea. Not much specific to Dinos discussed here. Good luck!
     
  3. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    #3 synchro, Nov 20, 2008
    To access the interior where the headlight is mounted, you must access the interior of the panel area by taking off the wheel and removing the forward splash panel (four 5mm cap bolts IIRC).
     

Share This Page