Replacing Plugs, Wires, & Extenders on Euro '84 Mondial QV | FerrariChat
Buy

Replacing Plugs, Wires, & Extenders on Euro '84 Mondial QV

Discussion in 'Mondial' started by cockrill, Mar 16, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. cockrill

    cockrill Formula 3

    Jan 23, 2008
    1,088
    Columbia, MO
    Full Name:
    Jeremy Cockrill
    #1 cockrill, Mar 16, 2009
    Hello:

    I am getting ready to replace the plugs, wires, and extenders on my Euro '84 Mondial QV. I've found (and ordered) NGK BP6ES plugs at a good price, and am searching for a set of Taylor universal wires now.

    I have a question regarding the extenders... I would like to replace all 8 due to their age, but I can't seem to find them at a reasonable price. I've read references to others purchasing them for $8 each, but I can't seem to find them for less than $30 each! Does anyone have a cheaper source for the extenders? (Or should I just not worry about the extenders unless I see anything wrong with them?)

    Also, since my car is a Euro model, are there any difference in wire/plug/extender specifications (vs. the U.S. counterpart cars) that I should be aware of?

    Thanks!

    --Jeremy
     
  2. lbanez

    lbanez Rookie

    May 11, 2004
    39
    Full Name:
    Angelo Albanese
    #2 lbanez, Mar 17, 2009
    Last edited: Mar 17, 2009
    YOU CAN FIND THE EXTENDERS ON EBAY ALL 8 FOR 90.00........PUT OEM WIRES ON YOUR CAR OR IT WILL NOT WORK ,,,,,,,,JUST BACKFIRE MISS AND RUN LIKE CRAP
     
  3. Steve King

    Steve King F1 Rookie

    Feb 15, 2001
    4,367
    NY
    #3 Steve King, Mar 18, 2009
  4. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    57,959
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    #4 mwr4440, Mar 18, 2009

    Get the correct extenders for your car as they come in two variations (resistor and non-resistor types).

    As to using only OEM wires--- HUH? Do not know where you got that.

    Once my OEM wires come off permanently (Cavis), I will NEVER put them back on my car .............
     
  5. M.James

    M.James F1 Rookie

    Jun 6, 2003
    2,721
    Worcester, MA
    Full Name:
    Michael.C.James
    #5 M.James, Mar 18, 2009
    Last edited: Mar 18, 2009
    I have seen a gentleman offer what appear to be CAVIS plug-wire sets on ebay. Does anyone have experience with this vendor? He's also selling the Red and the Black plug-wire extenders for both the 308 2V and the 308 4V/328 cars....the prices seem reasonable, but....anyone care to chime-in?

    The Kingsborne website indicates the correct OHM-rating for the plug extenders per model year, its very informative.
     
  6. Meister

    Meister F1 Veteran
    Silver Subscribed

    Apr 27, 2001
    5,516
    Duluth, MN
    Full Name:
    The Meister
    #6 Meister, Mar 18, 2009
  7. cockrill

    cockrill Formula 3

    Jan 23, 2008
    1,088
    Columbia, MO
    Full Name:
    Jeremy Cockrill
    #7 cockrill, Mar 18, 2009
    I ordered the extenders off of eBay.

    I've read the thread detailing the wire replacement using the Accel wires many times. The car in the thread is a GT4. My car is a Mondi 308 QV. Will the Accel wires work?
     
  8. Meister

    Meister F1 Veteran
    Silver Subscribed

    Apr 27, 2001
    5,516
    Duluth, MN
    Full Name:
    The Meister
    #8 Meister, Mar 18, 2009
    It's been working fine on my 80 2V for 2 years. The QV may have a different ignition set-up, others will know better than I on any possible differences, but overall, I'm happy with my conversion.

    Good luck
     

Share This Page