Replacing RH Fuel Pump in 360 | FerrariChat
Buy

Replacing RH Fuel Pump in 360

Discussion in 'Technical Q&A' started by Roadking80134, Jun 24, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Roadking80134

    Roadking80134 Formula Junior

    Dec 5, 2013
    267
    Spring, TX
    Full Name:
    Rick S
    #1 Roadking80134, Jun 24, 2014
    I lost power (random misfire) in Cyl 1-4. Turns out it's the RH fuel pump - only putting out 5lb instead of 50ish. The service center says they can replace just the pump instead of the entire assembly. Research shows it's a Bosch 0 580 313 052. Anyone with a similar experience? Thoughts on replacing just the pump vs entire assembly?
    Thanks!
    Rick
     
  2. vrsurgeon

    vrsurgeon F1 World Champ
    Silver Subscribed

    Dec 13, 2009
    16,527
    Charleston, SC
    Full Name:
    Curt
    #2 vrsurgeon, Jun 24, 2014
    Last edited by a moderator: Sep 7, 2017
    When mine had to be replaced it was because of plastic cracking. When you order the fuel pump.. you only have to order the pump itself, #1. Its a sealed single assembly with a filter and return line built into it. Unscrew the top #5, unbolt the 10mm bolts on #4, and then it just lifts out. You put the new one in and your good to go.
    Image Unavailable, Please Login
     
  3. Roadking80134

    Roadking80134 Formula Junior

    Dec 5, 2013
    267
    Spring, TX
    Full Name:
    Rick S
    #3 Roadking80134, Jun 24, 2014
    Yeah, I'm inclined to replace the whole thing, vs opening the canister, replacing the bosch pump, and sealing it back up.
    Rick
     

Share This Page