Replacing Thermal Time Switch | FerrariChat

Replacing Thermal Time Switch

Discussion in '308/328' started by Lowell, Aug 3, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Lowell

    Lowell Formula 3 Owner

    Joined:
    Apr 17, 2005
    Messages:
    1,165
    Location:
    Santa Fe, NM
    Full Name:
    Lowell Brown
    Can one access the thermal time switch by removing the oil filter?
    Anything else to remove to help access?

    Should not the radiator be drained some so that removing the switch does not make a mess?

    Any encouragement appreciated.
    Ham-fisted Lowell
     
    Lowell, Aug 3, 2020
    #1
  2. conan

    conan Formula Junior

    Joined:
    Nov 13, 2011
    Messages:
    389
    Not sure if you can get a wrench in there ... but it is worth trying, the oil filter is easy to remove.

    And yes, you need something to quickly cover the hole, maybe one of those rubber cones you can plug the hole with.

    I had a blind plug with the correct thread to screw in while testing the time switch.
     
    conan, Aug 4, 2020
    #2

Share This Page