Request for measurements (early GTB/GTS) | FerrariChat

Request for measurements (early GTB/GTS)

Discussion in '308/328' started by dflett, May 8, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dflett

    dflett Formula 3 Silver Subscribed

    Joined:
    Jun 24, 2005
    Messages:
    1,632
    Location:
    NY
    Full Name:
    David
    Dear fchat friends

    I have a small request for someone that has an pre 79 GTB or GTS with the rod spring cable reel present (Ferrari Part number #60108206). Mine is missing and I intend to attempt to 3D print one.

    Can someone please tell me the diameter and height of the real and also the width of one of the tabs used to attach to the deck. So d, h and w in the bad sketch below.

    Thank you in advance

    David

    Image Unavailable, Please Login
     
    dflett, May 8, 2017
    #1
  2. 308nut

    308nut Formula 3 Lifetime Rossa Owner

    Joined:
    Jul 22, 2002
    Messages:
    1,881
    Location:
    NOLA/Covington
    Full Name:
    Wade
    overall width of case is 55.64 mm, width overall at flange is 59.50

    height of case overall is 22.00mm height to flange is 19.00mm
    yes there is a 3mm thick flange on the bottom

    width of mounting tab is 12.07mm



    hope this helps

    Wade
     
    308nut, May 8, 2017
    #2
  3. dflett

    dflett Formula 3 Silver Subscribed

    Joined:
    Jun 24, 2005
    Messages:
    1,632
    Location:
    NY
    Full Name:
    David
    Wade,

    It does help. Thank you!

    David
     
    dflett, May 8, 2017
    #3
  4. jgmblair

    jgmblair Formula Junior Silver Subscribed

    Joined:
    May 27, 2010
    Messages:
    814
    Location:
    Winnipeg, MB Canada
    Full Name:
    Jeff Blair
    Old thread but wondering if you were able to 3D print one of these?
     
    jgmblair, Jun 15, 2024
    #4

Share This Page