Retrofitting 4 point harnesses and race seats on US GTO | FerrariChat

Retrofitting 4 point harnesses and race seats on US GTO

Discussion in '612/599' started by Superquant, Feb 6, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Superquant

    Superquant Formula Junior

    Joined:
    Apr 27, 2009
    Messages:
    431
    Has anyone investigated the feasibility of installing the ferrari 4 point harnesses on US spec GTO? And perhaps the race seats too?
     
  2. dan360

    dan360 F1 Rookie

    Joined:
    Feb 18, 2003
    Messages:
    2,669
    Location:
    Boston
    Its all doable - search in the 360 area for a variety of threads on doing this to the CS, I haven't looked specifically for the GTO, but its all parts. Where you'll get dinged is on all the trim for behind the seats and the shelf which will all be different to fit the revised parts. I'm sure you could do a custom job for short money, but if you want Ferrari factory parts I'd wager 30K+ is what it would cost you - the seats I think are 8K or thereabouts each...
     

Share This Page