RHD 1978 308 GT4 Clutch cable replacement | FerrariChat
Buy

RHD 1978 308 GT4 Clutch cable replacement

Discussion in '308/328' started by Anthony bentley, Mar 6, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Anthony bentley

    Anthony bentley Formula Junior

    May 20, 2006
    560
    London
    Full Name:
    Anthony Bentley
    #1 Anthony bentley, Mar 6, 2025
    About to tackle this job are there any write ups on here? I took a look under the car today and the engine end looks ok but how do I gain access at the pedal end, I can see under the dash but how do I get to the cable as it passes through the bulk head. My panel under the car seems to be riveted on.
     
  2. dino1971

    dino1971 Karting
    Silver Subscribed

    Sep 24, 2013
    156
    Bordeaux, France
    Full Name:
    Dario
    #2 dino1971, Mar 6, 2025
    Hi, the large panel is riveted on, but there are small access holes where the cable enters and exits the tubes. Also, there is a trap door just under the pedal that is held there with four screws. Of course, I have a LHD version, and do not know if your clutch cable has a different routing...
     
  3. miked

    miked Formula Junior

    Feb 7, 2001
    897
    Cincinnati, Ohio
    #3 miked, Mar 6, 2025
    Don't forget to check the small pulley that the cable runs over where it exits from the body in front of the engine. Many a clutch cable has suffered an early death from a seized or flat-spotted pulley, the pulley should rotate easily and smoothly. A bit of fresh lubrication is always a good idea.
     
    bitsobrits likes this.

Share This Page