RHD 308 GT4 relay board | FerrariChat

RHD 308 GT4 relay board

Discussion in '308/328' started by Nickt, Oct 13, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Nickt

    Nickt Formula 3

    Feb 24, 2006
    1,741
    Iver, Buckinghamshir
    Full Name:
    Nick T
    Hi Guys
    Does anyone know what relays do what on a RHD's relay board? Its different to the LHD version.
    Regards

    Nick
     
  2. 4redude

    4redude Formula Junior

    Jan 13, 2005
    732
    Fungus Corner
    Full Name:
    Brian Keegan
    If you have the proper owners manual for your car, it will answer your questions.
     
  3. Nickt

    Nickt Formula 3

    Feb 24, 2006
    1,741
    Iver, Buckinghamshir
    Full Name:
    Nick T
    OK, I don't, my handbook is for LHD. Hence me asking.

    Please?
     
  4. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,666
    South East
    Full Name:
    Jimmie
    How can this be helpful when particularly at that time Ferrari rarely updated manuals let alone had different versions for different markets

    On the GTB/GTS the relay map is on a sticker on the relay board cover - does this not apply to the GT4 ?
     
  5. Nickt

    Nickt Formula 3

    Feb 24, 2006
    1,741
    Iver, Buckinghamshir
    Full Name:
    Nick T
    Hi Jimmie
    In short no, the fuses are labelled but the relays are not. Francis N and Rich don't know either. The handbook only covers LHD as does the official heavy duty workshop manual, and I do have both of them.

    Someone must know!
     
  6. Iain

    Iain F1 Rookie

    Jan 21, 2005
    3,321
    UK
    Hi Nick,

    according to the parts diagram that relay board is shared with the carb 308 , the 308 GTSi/GTBi & also the carb'd 512 BB

    https://www.ferrariparts.co.uk/PagesExternal/ViewExploded.aspx?PageID=734 , part 8, 60035805

    Chances are the relays will do the same thing across the different models I would have thought. (or is that the LHD board again?)
     
  7. Nickt

    Nickt Formula 3

    Feb 24, 2006
    1,741
    Iver, Buckinghamshir
    Full Name:
    Nick T
    Thanks Iain
    I have looked through the archives and found a post for a RHD Australian spec GT4, but that too seems different from the UK one due to twin dizzies. They all seem to be different! I think the drawing you have is for a LGD one again.

    I have this, but as I said its for an Aussie car:
    According the 76 AUS RHD Series 2 owners manual,it shows 6 relays on top,5 on the bottom.
    Relays on top are as follows (from left to right)..
    1- Relay for engine starting
    2- Relay for radiator left fan
    3- Relay for radiator right fan
    4- Relay for radiator right fan operating air conditioner
    5- Relay for window motors
    6- Relay for horn

    Relays on the bottom are as follows (left to right)
    1- Relay for external lights
    2- Relay for main beam
    3- Relay for headlamps lifting motor
    4- Relay for LH headlamp lifting motor
    5- Relay for RH headlamp lifting motor
    There is also one more relay which is located on a third row
    Relay for brakes warning light.

    Under the fuses there is another relay which is for the emergency flashing lights.
     
  8. Iain

    Iain F1 Rookie

    Jan 21, 2005
    3,321
    UK
    I think I'd just start pulling relays & seeing what did & didn't work!
     
  9. Nickt

    Nickt Formula 3

    Feb 24, 2006
    1,741
    Iver, Buckinghamshir
    Full Name:
    Nick T
    I tried that but some don't seem to do anything! The wiring on these cars is generically such a mess. I have fitted the birdman fuse box, which made things work brighter and faster but it still looks like a bowl of spaghetti.
     

Share This Page