Anyone know what size of RIBE key for the 8 screws beween the flywheel and damper on a 1997 355? M10, M11 or whatever. Thanks in advance. Ron
Looking at pics the "across points" of the six pointed star of business end looks to be smaller than the 10mm shank of the bit (and by measuring across the recesses of the set screw head) - makes me think that it's an M8. Very grateful if you can check. Seems to me that most people use a torx T45 but mine are so tight that I risk damage. By the by, it was me who bought the Kluber grease from you a few months back. Looking forward to getting the grease in there! Thanks Andrew, Ron
Hi Ron, just looked at my tools and it's an M8. Shows what I remember! Get a good quality one, I've had problems with cheap ones breaking. A quick re grease and you'll be up and running fro Spring!
Great Andrew. Just as well because I ordered a good quality M8 impact one from the UK - can't find any here. Thanks for doing that for me (and for anyone else that needed to know). Cheers, Ron
