Riddle

amenasce · Nov 22, 2005

ylshih said:

OK, here's the definitive "non-tricky" answer for a fully sealed room !

If it's a wood or wood/plaster room then break the table and mirrors and use the sticks/legs and shards as tools to make chinks, cut wedges, lever slats off or bust through plaster, making a hole any way you can.

If it's a brick or concrete room, find the spot of uncured mortar or concrete that is the freshly sealed opening and use the tools as above on the weak spot in the room. (Caution: don't break the table until you're sure the weak spot isn't in the ceiling, if it is you can only break off one table leg.)

If it's a steel room that's been welded/riveted closed then:
- break the mirror into two large pieces
- break the table into pieces
- stick the two mirror pieces into two legs used as handles
- use the other two legs to rub together and start a fire
- put all the fuel together to build the hottest fire you can
- blow as hard as you can on the fire to get it even hotter
- hold the mirror pieces on either side of the fire
- hope you can hold the mirrors exactly parallel
- hope that the mirror surfaces are flat to within 1/4 wavelength or better
- there is an infinitesimal (hah!) chance you have created a laser which can burn a hole through the steel
- if not you're dead anyway because you just consumed all the oxygen in the room
Click to expand...

Thats too complicated, id rather stay in the room

Conversations

Alerts

Riddle

amenasce Three Time F1 World Champ
Silver Subscribed

Share This Page

Riddle

amenasce Three Time F1 World Champ Silver Subscribed

Share This Page

amenasce Three Time F1 World Champ
Silver Subscribed