Right procedure to remove gears on gearbox shaft ? | FerrariChat

Right procedure to remove gears on gearbox shaft ?

Discussion in '206/246' started by chritin, Sep 22, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. chritin

    chritin Rookie

    Jul 12, 2007
    39
    france
    Full Name:
    chritin regis
    Hi all,

    I've reveiced my new parts and now need to remove gears on the shaft. As they doesn't move freely I guess I must apply press pressure as shown on this picture to move all the elements in the group, but is there anyone who as already done it to confirm me it is the right procedure ?

    Thanks

    Régis

    Image Unavailable, Please Login
     
  2. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,635
    Is this not covered in the workshop manual?
     
  3. chritin

    chritin Rookie

    Jul 12, 2007
    39
    france
    Full Name:
    chritin regis
    No I didn't find details on that
     
  4. fatbillybob

    fatbillybob Two Time F1 World Champ
    Consultant Owner

    Aug 10, 2002
    28,772
    socal
    My tips are similar to others posted. I have not done your box but others. Yes many ferrari shafts have an integrated gear. The parts diagram is most helpful as you study completed shafts. I also look for retention cir clips and use the gravity method first. Sometimes I use a right sized pipe and a hammer. Last I go to a press.
     
  5. chritin

    chritin Rookie

    Jul 12, 2007
    39
    france
    Full Name:
    chritin regis
    Finally it was easy to remove with a press as shown on my picture in my first message
     
    JL350 likes this.

Share This Page