Rod's for 330, 308, 328 and 512- Carrillo | FerrariChat
Buy

Rod's for 330, 308, 328 and 512- Carrillo

Discussion in 'Technical Q&A' started by BarnFound330, Apr 26, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BarnFound330

    BarnFound330 Karting

    Feb 1, 2005
    89
    Pleasanton, Ca
    Full Name:
    Vince Bobba
    #1 BarnFound330, Apr 26, 2005
    I was told the rods are interchangeable between the above models (and possibly others??), and want to verify prior to purchase! In speaking with Carrillo they say their FE-328>65394 rod with the following dimensions would work on a 330:
    Center to center= 5.394 in
    Big end ID= 1.8557 in
    Small end id= .7290 in
    Full floating wrist pin= 18.5 mm
    Small end thickness= .825 in
    Big end thickness= .821 in
    Balanced end for end +/- 1 gram
    Does this sound right?
    I'm assuming for street applications the Carr bolts are unnecessary?
    Thanks very much, Vince
     
  2. spang308

    spang308 Formula Junior

    Jul 17, 2004
    893
    York, PA
    #2 spang308, Apr 26, 2005
    I cant verify any dimensions, but I will suggest you use Carillo rod bolts with the rods. They are sensitive to bolt stretch and should be measured for such during the torque process when installing the rods. You will need a dial indicator with a C shaped adapter to measure the stretch. If they stretch too much, discard them and use new.
    Check with Carillo, but I am pretty sure they will agree.

    My .02.

    Good luck,
    John

    P.S. Carillo makes some of the nicest stuff in the industry. Nice choice.
     
  3. Ferrari_tech

    Ferrari_tech Formula 3

    Jul 28, 2003
    1,527
    UK
    Full Name:
    Malcolm W
    #3 Ferrari_tech, Apr 26, 2005
    Can confirm that Big-end, small end and wrist pin dimentions are the same, not sure about the rest.
     
  4. atlantaman

    atlantaman Formula 3

    Mar 31, 2002
    1,726
    Roswell, Georgia
    Full Name:
    Charles
    #4 atlantaman, Apr 26, 2005
    Barn--Please call me ASAP--I too am preparing to buy rods for my 330 motor
    Charles
    678-427-0435
     

Share This Page