360 - Rotor size for Brembo BBK | FerrariChat
Buy

360 Rotor size for Brembo BBK

Discussion in '360/430' started by Aaronfl06, Jul 15, 2025 at 9:41 AM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Aaronfl06

    Aaronfl06 Rookie

    Jun 30, 2021
    17
    SWFL
    Full Name:
    Aaron
    #1 Aaronfl06, Jul 15, 2025 at 9:41 AM
    I'm looking to get into more track days with the 360. I have track pads I'm going to try with the OEM brake setup, but I'm anticipating I will end up ordering one of the Brembo big brake kits. What size rotors are recommended to keep the braking balanced? I was planning to do the 380mm 6 piston setup for the front and rear, but figured I'd better post on here to see if that's the best route vs doing the smaller 4 piston kit for the rear.

    Thanks!
     
  2. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,159
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #2 tazandjan, Jul 15, 2025 at 1:45 PM
    The 380 mm kit is likely too big for 18" wheels.
     
  3. Aaronfl06

    Aaronfl06 Rookie

    Jun 30, 2021
    17
    SWFL
    Full Name:
    Aaron
    #3 Aaronfl06, Jul 15, 2025 at 2:34 PM
    I'm running 19" wheels.
     
  4. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,110
    Full Name:
    Josh @jtcarprojects
    #4 clean512, Jul 15, 2025 at 8:30 PM
    The 380mm front and 350mm rear is factory size. 6 piston in front and 4 piston in the rear
     
    Aaronfl06 likes this.
  5. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,159
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #5 tazandjan, Jul 15, 2025 at 11:03 PM
    Should work fine, then. Scuderias have 398 mm front rotors on slightly wider 19" wheels, so 380 mm should be no problem.
     
    Aaronfl06 likes this.

Share This Page