RSC-1 on the street | FerrariChat
Buy

RSC-1 on the street

Discussion in '360/430' started by skip737, Jul 2, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. skip737

    skip737 Karting

    Dec 31, 2008
    115
    Lodi, New York
    Full Name:
    WJH
    #1 skip737, Jul 2, 2014
    Has anyone out there used Pagid RSC-1 pads on their Scud coupe or 16M for street use? I am interested in trying a set to see if I can get better feel than the stock pads for strictly street use. Not to mention, they are WAY cheaper. $1650/ set for the OEM pads? Ridiculous. It must cost Brembo only a very small fraction of that to manufacture them. Welcome to the highway robbery world of Ferrari parts.
     
  2. singletrack

    singletrack F1 Veteran

    Mar 16, 2011
    5,805
    Pittsburgh, PA
    #2 singletrack, Jul 2, 2014
    I use them on the street and the track - I don't swap pads. I would say they feel similar to factory pads if bedded properly.

    The brembo factory pads are also made by Pagid FYI.
     

Share This Page