Rubber Door Window Weather Strip / Scraper: Source and HowTo? | FerrariChat

Rubber Door Window Weather Strip / Scraper: Source and HowTo?

Discussion in 'Mondial' started by schelle_pelle, Jun 20, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. schelle_pelle

    schelle_pelle Karting

    Oct 22, 2021
    197
    Berlin, Germany
    Hi there,

    on my 3.2 the weather strip for the window in the doors is not perfect anymore and I would like to change it. It does not seem to be an overly complex rubber profile so I thought it might be a standard profile which could be sourced anywhere... Is anyone aware of a reference?
    The part would be available through Maranello and is not really expensive, but an alternative would be nice:

    60635900

    https://www.ferrariparts.co.uk/part/ferrari/60635900

    Next: How do I change the rubber? Do I have to pull the glass?!
     
  2. schelle_pelle

    schelle_pelle Karting

    Oct 22, 2021
    197
    Berlin, Germany
  3. ronfrohock

    ronfrohock F1 Rookie
    Owner Rossa Subscribed

    Aug 16, 2004
    4,156
    MA
    Full Name:
    Ron Frohock
  4. theunissenguido

    theunissenguido F1 Rookie
    Owner Silver Subscribed

    Jan 21, 2004
    2,668
    Argent/Brasil
    Full Name:
    Guido
    This part comes loose when lifting from one side with a plastic or wood dowel.
     
  5. Mondi Cab

    Mondi Cab Karting

    Oct 9, 2019
    170
    EU
    Full Name:
    J.Schulz
    Hi Schelle Pelle,

    By coincidence I received a list this morning:

    Not sure if this fits your vehicle, but try this link:
    https://www.cicognaniguarnizioni.it/Ferrari-163/mondial-163-l34/guarnizione-raschiavetro-interno-bordo-inox-_set-completo_-16334933_7859

    Hope to have helped.

    Mondi Cab
     
  6. 350HPMondial

    350HPMondial F1 Veteran
    Silver Subscribed

    Feb 1, 2002
    5,325
    18 mi from the surf,, close to Pismo, CA
    Full Name:
    Edwardo
    a Fiat part. I got some from Centerline.
    Trim to fit.
    Note; Removing the trim from the car always breaks the plastic fasteners. Replacing is tricky, I used ss lock wire , accessed from the inside of the door

    good luck
     
  7. schelle_pelle

    schelle_pelle Karting

    Oct 22, 2021
    197
    Berlin, Germany
    That was a good hint! I found the profile on an Alfa Spider <93. The profiles are just a bit short (77cm) on the Mondial you need 100cm.
     

Share This Page