Sagging headlining | FerrariChat
Buy

Sagging headlining

Discussion in '308/328' started by timtom, Aug 7, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. timtom

    timtom Rookie

    Jul 7, 2006
    14
    #1 timtom, Aug 7, 2006
    Has anyone any remedies for a sagging headlining on a 308 GTS? It's in good condition so I am not keen to fit a new one. Cheers.
     
  2. Matt308

    Matt308 Formula Junior

    Feb 16, 2004
    487
    CO
    Full Name:
    Matt
    #2 Matt308, Aug 7, 2006
    I just did mine finally last year. I just peeled it off except for just the edge on one side, used a spray-on uphostery adhesive (contact cement?), and then once it was tacky just started on the side I didn't remove and work it on with a plastic blade and a small j-roller. Was very easy and hasn't come down yet! I left one edge so I wouldn't have to worry too much about alignment, 'cause once that glue sticks, it's done! Good luck. -m
     
  3. timtom

    timtom Rookie

    Jul 7, 2006
    14
    #3 timtom, Aug 9, 2006
    Cheers Matt. I'll give it a go.
     

Share This Page