360 Scrape Armor bumper protection

I didn't see where there was any information on the forum on installed photos or experiences with bumper/scrape protection for the 360 (or 430 for that matter), so I did some research and there appear to be surprisingly few options on the market. Ricambi offers a package but it only covers a very small area at the frontmost portion of the bumper; I found a product offered by Scrape Armor that seemed to offer significantly more coverage, protecting all of the lowest hanging areas of the front bumper. See below for photos of the final, installed result - the protection is basically invisible from most angles once installed.

Installation consists of a combination of hardware and silicone sealant - you need to drill eight 5/32" holes per side in order to hard-mount the plates in place, and the included silicone sealant is used to fill in any gaps between the plate and bumper. if there was one thing that I found to be less than perfect, it's here - due to the curvature of the 360 bumper and the flatness of the product, the gap is a little larger than I would have liked, but is likely a non factor for newer Ferraris with flatter front fascias.

Overall I'm pleased with this product, it seems to offer the most protection of anything on the market for those inevitable "oops" moments when you encounter steep driveways/speed bumps in the wild. Everything needed for install (stainless hardware, sealant, drill bit, etc), is included, the installation is robust, and the material appears to be of high quality. I'll follow-up if I ever end up "testing" the product to show how it holds up in the real world.

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

And a couple of photos from when the car was still up in there air so you can better see the protection coverage. Note that the bumper protection sits essentially flush with the factory front underbody panel, so overall ground clearance isn't affected. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login