Wanted Scuderia/16M BATA Inner Fenderwell Covers

These are the thin plastic covers that mount near your feet on either side of appropriately optioned Scuderias and 16Ms. Called BATA (Back Alcantara Arch). See attached image.
I need to borrow these two covers for a few days. All I need to do is to have them 3D scanned. I don't need to mount them in a car, test fit them or anything. They will simply be placed inside of a 3D scanner, taken back out and sent back to you. I will pay ONE THOUSAND DOLLARS. Once I have these 3D scanned, I can make replacements with or without speakers and in either plastic or Carbon Fiber for my speaker box business.
Thanks, Image Unavailable, Please Login
Mike
www.scuderiaaudio.com

 

I had a couple of people that were initially willing to help out (thank you) but they seemed to have disappeared.
This offer is still open. This is the company that would be performing the 3D scanning on the parts: www.scansite.com.
They are within driving distance from me and do car parts all the time. This is a piece of cake for them. The actually 3D scan and make foam models of full sized cars!

 

Just an FYI, it really is not a big deal to get these in and out of the car. You basically remove the floor pan, grab them in the center on the bottom and pull outward. As you can see from the image, there is nothing tricky that you cannot see, no fasteners, etc. It basically tucks inside of the lower dash, door sill, etc.
Image Unavailable, Please Login

 

I am upping the ante to two thousand dollars. Thanks

Mike

 

Got it! A pair of covers are on the way to me. Thanks!!