Scuderia Audio 612 Speaker Upgrade Project | FerrariChat

Scuderia Audio 612 Speaker Upgrade Project

Discussion in '612/599' started by SoftwareDrone, Aug 26, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. SoftwareDrone

    SoftwareDrone F1 Veteran
    Sponsor Owner Rossa Subscribed

    Jan 19, 2004
    7,503
    San Jose, California
    Full Name:
    Mike
    The 612 rear side panel speaker setup is tricky as they have some sort of tube that directs the sound to the surface of the actual panel for maximum efficiency. In order to mount a larger driver (in this case, a high end Morel carbon fiber 6 1/2" two way speaker), we have to design and 3D print an adapter plate as well as a larger tube.
    Here are some images of the preliminary design.

    Image Unavailable, Please Login Image Unavailable, Please Login
     
    brogenville and 599_GTO like this.
  2. SoftwareDrone

    SoftwareDrone F1 Veteran
    Sponsor Owner Rossa Subscribed

    Jan 19, 2004
    7,503
    San Jose, California
    Full Name:
    Mike
    The paper speakers are replaced with Morel high end carbon fiber 6 1/2 inch midrange/midbass drivers with silk domed 1 inch tweeters.
    The stock sheet metal sound tubes are replaced with thicker, 3D printed nylon tubes which are less prone to resonating.
    These pieces lock into 3D printed nylon adapter plates with gusseted mounting points to the car and brass threaded inserts for the drivers.

    Along with my Peerless (made in Germany) 13 inch subwoofer system, I honestly cannot imagine a way to get better sound out of a 612 Scaglietti.


    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
    Makuono and brogenville like this.

Share This Page