searched archives, found pics, still can't get GT4 seat out!

When you figure it out, let me know. I can't do it either.

 

I would like to know too. I don't have a GT4 but would like to know. On my 308 it was just the 4 bolts and lift straight up. I had some brackets over them but other than that it was straight forward. Sorry I can't be more help. Keep us posted.

 

I can't believe the problem that your having. My seat came out after removing only the two bolts inside the side pockets. Once they were removed the bottom of the seat was loose, then I raised the seat up to disengage the lip along the top edge (the headrests may have to be removed to get enough upward movement). Maybe someone glued your seat in place. Check along the bottom edge were the carpet runs under the seat, my car had a lot of carpet glue overspray in that area. Here is a picture of the back of the seat, only one bolt per side.

 

I have a GT 4 also and last year when I tried, could not remove the back seat even after removing the head rests. I was recently told by an upholstry shop that sometimes the leather seat glues itself to the side panels, and that i should try to slip something in between to seperate them,moving ittop to bottom carefully as to not damage the leather. I have not tried this yet. If u do please let us know how it goes.

 

The rear seat is a 'soon'-type project.......

However, I had to remove the glove box. It's covered in vinyl, and it did securely glue itself to the rest of the dash. I had to pry it away. (carefully!)