Searching for a 456 ignition cable boot(spark plug side) | FerrariChat

Searching for a 456 ignition cable boot(spark plug side)

Discussion in '456/550/575' started by joakim_adolfson, Apr 29, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. joakim_adolfson

    joakim_adolfson Karting

    Sep 19, 2009
    168
    Stockholm, Sweden
    Full Name:
    Joakim Adolfson
    One of the spark plug boots broke When i tried to fond a fauled plug and I have no need in buying a ned harness. Has anyone got a spare that I van buy?



    Sent from my iPad using FerrariChat.com mobile app
     
  2. joakim_adolfson

    joakim_adolfson Karting

    Sep 19, 2009
    168
    Stockholm, Sweden
    Full Name:
    Joakim Adolfson
  3. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,277
    Sydney
    Full Name:
    Ian Riddell
    Only within a certain time period.
     
  4. rviani

    rviani Karting

    Jun 22, 2005
    81
    NJ
    Full Name:
    Ron Viani
    I did some research on this subject some time ago in an attempt to fix a misfire problem on my '95 456 GT. Ferrari only sells the complete ignition set at a very high price but it seems components are available from BERU which look like they will fit. The wires and ignition coil boots are easy but the original spark plug boot is not. However, I did some careful measurement and it looks like BERU part # 0 300 332 112 (for Audi) will fit. Probably available from Kingsborne Wire Works in CA. Turns out my problem was elsewhere so I replaced wires but never actually purchased or tried these. If you do please let me (and other interested parties on the list) know how it works out. Hope this helps.
     
    tantumaude likes this.
  5. Prit Singh

    Prit Singh Karting

    May 29, 2017
    96
    London
    I have some spare ones left. Will check the condition of them.
     
    joakim_adolfson likes this.
  6. joakim_adolfson

    joakim_adolfson Karting

    Sep 19, 2009
    168
    Stockholm, Sweden
    Full Name:
    Joakim Adolfson
    please do thx, I only want the boot with the ferreri logo on; the wire itself is in good shape. Last time I broke one I managed to buy one secondhand off this forum :)


    Sent from my iPad using FerrariChat.com mobile app
     
  7. Lionworks Auto

    Lionworks Auto Formula 3

    Oct 16, 2013
    1,023
    Worthington OH
    Full Name:
    Ed
    Reviving. Anyone willing to part with an old spark plug boot for the 456/M / 550? I’ve had one fail and they are truly unobtanium. Alternates are unobtanium. I don’t want to spend $2k for a complete wire kit as I’ve rebuilt almost the whole kit already.

    It also appears that the COP preferred pencil coils are also becoming unobtanium as am considering that..but to no avail.

    I’ve got this lovely 4000 lb V12 and a little rubber boot is holding her at bay. I’ll pay.

    Ed

    Part number:
    BERU 0 300 332 121




    Sent from my iPhone using FerrariChat
     

Share This Page