Searching for a TR Schematic...

Does anyone have a schematic(s) for the front spoiler (showing how it attaches) & then one for the driver side door/window for a 1989 Testarossa? I need to complete a few repairs.

Thanks

Marc Thurston
[email protected]

 

Please use the search function as both your requests have been thoroughly covered in the past.

K.

 

First remove the center bolt (10mm) in the center under the hood.
At that point, crank the steer tires to the inside (drivers side to passenger and visa versa)
Next remove the enclosure panels in the front of the wheel wells 5 to six bolts (10mm). With these panels removed you gain access to the 10mm nut that is located about 3" inside the fender. JUST loosen it 2 or 3 turns.
Now remove the yellow parking/turn lens with a philips screwdriver. You then take a regular straight blade screwdriver and remove the 2 screws and take out the light assembly, unplug the electrics and set aside. This now gives you "access" to the 10mm nut that is located about 15" in front of the wheel well opening. Again JUST loosen 2-3 turns.
You then remove any philips head screws (thats what was holding the aluminum belly pan covers on mine) or rivets from the front bottom edge of the spoiler.
Now the spoiler should be pulled forward and there ya go.
I suggest that when replacing any of the panels or the spoiler itself that you use new stainless steel bolts/nuts/washers/screws and anti-sieze. Also here is your opportunity to clean any debris out of the AC condenser and clean and detail areas that NO ONE will ever see.........but you will know are clean, tidy and correct!

Here is the link http://ferrarichat.com/forum/showthread.php?t=98940

Hope this is helpful to others. Kerry

 

Thanks for the help
Marc