Seat Removal | FerrariChat
Buy

Seat Removal

Discussion in '308/328' started by GeoMetry, Jun 19, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. GeoMetry

    GeoMetry Formula Junior

    Apr 14, 2008
    471
    Virginia
    Full Name:
    Richard
    #1 GeoMetry, Jun 19, 2008
    Last edited: Jun 19, 2008
    I can't seem to figure out how to remove the seats from my 85 308 QV. I have removed the two 6mm Allen bolts from the front but I can't figure out how to get to the back bolts. I thought I would simply slide the seat forward to access the bolts but I can't get the seat to go forward enough to reveal the rear bolts. The parts drawing didn't really help either. What am I missing?
     
  2. spiderseeker

    spiderseeker Formula 3

    Jul 22, 2005
    1,718
    Colorado
    Full Name:
    Steve
    #2 spiderseeker, Jun 19, 2008
    Last edited: Jun 19, 2008
    That's all you have to do, you just don't have the seat all the way forward., try lubing the rails with some oil and try again. Make sure the seat isn't pushing against the floor mats etc.
    I had mine out and I have an 85'qv, that's all I had to do. (maybe tilt the seat forward too)
     
  3. GeoMetry

    GeoMetry Formula Junior

    Apr 14, 2008
    471
    Virginia
    Full Name:
    Richard
    #3 GeoMetry, Jun 19, 2008
    Thanks that worked. I guess I was just being too timid.
     

Share This Page