Seatback Release lever

Disatisfied with the re-dye of my driver's seat, I've elected to reupholster both seats (so they match), and have gotten the kit through Cabrio World. The actual product is made by GAHH in Calif, and the leather and finishing looks perfect.

I will be doing the reupholstering myself and will post photos of the process shortly as I progress, so stay tuned.

Anybody know how to remove the seatback release levers on both sides of the seat back? (see attached schematic).

Thanks!
Bob
Image Unavailable, Please Login

 

Any ideas or suggestions?

 

Well if it is like many of the other seats I've stripped it will be forced on over the metal release arm, most are an interference fit.
I would check that there are no signs of a release clip underneath the handle where it meets the metal arm, if not, then apply some pressure, I use a trim puller and protect the leather and the delicate surround with another piece of thick leather.

Good luck

 

That makes sense. Thanks for the kind reply.

 

It worked. Thanks!

 

It's one of those things that's is best to double check first! Glad you got it sorted

 

Would love for you to give us a blow-by-blow with photos- Last seats i reupholstered were a 73 Alfa Spider and it was a ROYAL PITA.