Seats - Photos Please!

Scott.Mac and I were looking at the seats from one of his Dinos and my Dino, and we started wondering about the strap systems that support the foam. Scott's seats have the straps grouped into two groups of four straps each. One of the straps on one of his seats (but not the other) has an extra piece of strapping that is attached in the middle and puckered - apparently to allow a wire and some sort of pressure switch to be held in place. I have the same thing on one of my seats (but also not on the other). We suspect that this was for a "fasten seatbelts" buzzer connected to the driver's seat, although I have been also told that this was for a fuel pump cut-off switch in case you managed to roll your Dino. Do others here have the same thing? Are your straps grouped in the same way? Do you have a burlap or nylon cloth just above the webbing that supports the foam? I have attached photos of Scott's seats and would appreciate your comments and photos for comparison.

Thanks -
Mark
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login