Setting a 360 PIS Manually | FerrariChat
Buy

Setting a 360 PIS Manually

Discussion in '360/430' started by Akram, Aug 28, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Akram

    Akram Formula Junior

    Aug 17, 2009
    352
    Clive, Iowa
    Full Name:
    Ray Salloum
    #1 Akram, Aug 28, 2010
    Guys, I now there is a procedure to manually set the PIS on a 355 but is there a way to do so on the 2001 360? I don't know if the car has the updated ECU/TCU. I have thoroughly search F-chat and was unable to find a thing.
     
  2. rberg32

    rberg32 Karting

    Mar 14, 2007
    245
    #2 rberg32, Aug 28, 2010
    I know that the 430's, 599's and 612's require the SD3 to do the PIS... I would imagine the same is required for the 360.

     
  3. pmotoring

    pmotoring Formula Junior

    May 8, 2009
    693
    HONG KONG
    Full Name:
    PAT PAT
    #3 pmotoring, Aug 28, 2010
    Sorry May I know what is PIS??
     
  4. Red 27

    Red 27 Formula 3

    Feb 2, 2008
    1,002
    San Diego, Ca
    Full Name:
    Dave
    #4 Red 27, Aug 28, 2010
    Point of Initial Slippage
     
  5. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,187
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #5 tazandjan, Aug 29, 2010
    You need an SD2/3 or similar tool ($10K+) to set PIS correctly. Durametric is bringing out a tool this fall for a reasonable price that will set PIS. Do not let anyone tell you they can do it manually.

    Taz
    Terry Phillips
     

Share This Page