Shield placement for 360 | FerrariChat
Buy

Shield placement for 360

Discussion in '360/430' started by KILOCHARLIE, Feb 28, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. KILOCHARLIE

    KILOCHARLIE Formula Junior

    Oct 14, 2012
    321
    Cardiff, UK
    Full Name:
    KC
    #1 KILOCHARLIE, Feb 28, 2014
    Does anyone know the exact placement of these? I bought a new set of the stick ons and after removing the old ones and claying my car, I can't see where the old ones went.

    Also did the same with pininfarina badges on the side skirt if anyone knows this as well.

    Thanks all.
     
  2. E60 M5

    E60 M5 Moderator
    Moderator Owner

    Jan 2, 2006
    8,168
    Wash DC area
    Full Name:
    Robert
    #2 E60 M5, Feb 28, 2014
    Last edited by a moderator: Sep 7, 2017
    I used these directions to place my shields from Daniel at Ricambi and they went on perfect!

    On the drivers side, the top right corner of the shield should be 72mm from door panel gap, and the bottom 'tip' of the shield should be 84mm from the door panel gap. Using those two measurements should, based on the curvature of the fender, provide the correct vertical orientation as well as horizontal.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  3. KILOCHARLIE

    KILOCHARLIE Formula Junior

    Oct 14, 2012
    321
    Cardiff, UK
    Full Name:
    KC
    #3 KILOCHARLIE, Feb 28, 2014
    Thanks mate. Much appreciated!
     
  4. Fatty

    Fatty Karting

    Jun 5, 2010
    235
    Australia
    #4 Fatty, Feb 28, 2014
    When you removed the old badges, did you notice 'paint fade' compared to the paint
    beneath the old badges?
     
  5. English Rebel

    English Rebel Formula 3

    Aug 13, 2013
    2,158
    Piedmont Area of NC
    Full Name:
    Alan
    #5 English Rebel, Mar 1, 2014
    Looks like the tip at the bottom is just above the crease line.
    Alan
     

Share This Page