Shift Shaft seal leak | FerrariChat
Buy

Shift Shaft seal leak

Discussion in '206/246' started by Dave Farrell, Dec 15, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Dave Farrell

    Dave Farrell Rookie

    May 28, 2018
    8
    Omaha Nebraska
    Full Name:
    Dave Farrell
    #1 Dave Farrell, Dec 15, 2022
    I have a 206gt that is leaking trans oil from the shift shaft. I see that there is an o ring sold for the shaft. Is that what seals the shaft to the case or is there a oil seal inside the case? How would you replace the o ring or seal? I noticed that there is a removable plate on the bottom of the case.
    Thanks in advance
     
  2. Nuvolari

    Nuvolari F1 Veteran
    Owner Silver Subscribed

    Sep 3, 2002
    6,638
    Toronto / SoCal
    Full Name:
    Rob C.
    #2 Nuvolari, Dec 16, 2022
    If you look in the 308/328 section there are endless threads on this subject and the 206 is effectively the same design. Simply put there are 2 O-Rings that seal the shift shaft. One seals where the shaft comes out of the engine and another seals between the engine oil sump and gearbox oil sump. If you are changing one you will want to change both. Again I urge you to look in the 3X8 area as there is tons on information on the subject.
     
  3. Dave Farrell

    Dave Farrell Rookie

    May 28, 2018
    8
    Omaha Nebraska
    Full Name:
    Dave Farrell
    #3 Dave Farrell, Dec 16, 2022
    Thank you
     

Share This Page