News

430 Shifter cable tie rod

Discussion in '360/430' started by tpbriggs, Feb 16, 2020.

  1. tpbriggs

    tpbriggs Rookie

    Mar 28, 2016
    7
    Does anyone know if a 360 shifter cable tie rod end will fit an F430? Broke the tie rod end while installing new shifter bushing and it looks like Ferrari only sells entire cable set for F430 but does sell shifter cable tie rod for 360. Thanks for any help!




    Sent from my iPhone using FerrariChat.com mobile app
     
  2. To remove this ad click here.

  3. brogenville

    brogenville Formula Junior
    Silver Subscribed

    Apr 24, 2012
    854
    UK
    Full Name:
    Robin
    Shift towers are interchangeable between 360 and 430, so I would assume the cable end connections are too.


    Sent from my iPhone using FerrariChat.com mobile app
     
  4. tpbriggs

    tpbriggs Rookie

    Mar 28, 2016
    7
    brogenville likes this.
  5. shifter

    shifter Formula Junior
    Silver Subscribed

    Apr 8, 2004
    469
    Danville, Ca
    Full Name:
    Joe
    Agree, it should work.

    For others doing the same - replacing the bushing, It can be done without removing the Assy.



    Sent from my iPhone using FerrariChat
     
  6. tpbriggs

    tpbriggs Rookie

    Mar 28, 2016
    7
    Closing the loop on this one. The 360 shifter cable tie rod end is an exact replacement on the F430. If you are changing your shifter bushing do your self a favor and do it with the shifter in place. If you search the forum for “Hill shifter bushing replacement F430” there is an informative write up by shifter.


    Sent from my iPad using FerrariChat.com mobile app
     
  7. To remove this ad click here.

Share This Page