Shock bolt hitting control arm with QA-1 | FerrariChat
Buy

Shock bolt hitting control arm with QA-1

Discussion in 'Technical Q&A' started by BillyD, Jun 14, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BillyD

    BillyD Formula 3
    Silver Subscribed

    Feb 28, 2004
    1,837
    Pacific Northwest
    Full Name:
    Bill
    #1 BillyD, Jun 14, 2010
    I've been chasing a knock in the rear suspension of my 308GTB every since I installed the recommended QA1 shocks & springs. It looks like the head of the bolt that mounts the lower end of the shock to the hub strikes the control arm on bumps. This is not a problem with the stock Koni & springs as I don't believe the suspension ever compresses to this point. I did each corner individually so I don't believe I mixed up the left & right upper arms but if anyone has a picture of their arms to verify this I'd appreciate it. I'm about to do a little grinding on the control arm for clearance. I put the stock Konis on temporarily & there is no way I can live with the 4 wheel drive stance now that I've seen it lowered.
    Suggestions and experience wanted.
    Bill
     
  2. 350HPMondial

    350HPMondial F1 Veteran
    Silver Subscribed

    Feb 1, 2002
    5,336
    18 mi from the surf,, close to Pismo, CA
    Full Name:
    Edwardo
    #2 350HPMondial, Jun 14, 2010
    Bill,

    I believe you need a set of, "paperweights" from Birdman.

    Good Luck,

    Edwardo
     
  3. BillyD

    BillyD Formula 3
    Silver Subscribed

    Feb 28, 2004
    1,837
    Pacific Northwest
    Full Name:
    Bill
    #3 BillyD, Jun 14, 2010
    Thanks but paperweights are installed on the front & this is on the rear.
    Anyone? Bueller? Bueller?
     
  4. Jdubbya

    Jdubbya The $10 Trillion Man
    Silver Subscribed

    Dec 28, 2003
    43,653
    Hell's waiting room
    Full Name:
    John
    #4 Jdubbya, Jun 14, 2010
    I don't have that problem Bill. Did you lower it way down? I only dropped mine a bit. Actually I didn't have that problem in front either but I went with a slightly different model of the QA-1 shock.
     
  5. Darolls

    Darolls F1 Veteran
    BANNED

    Jul 2, 2003
    7,782
    Full Name:
    Sparky
    #5 Darolls, Jun 14, 2010
    Better yet, grind the bolt if you can.
     
  6. Dave

    Dave F1 Rookie

    Apr 15, 2001
    2,722
    Little Rock
    Full Name:
    David Jones
    #6 Dave, Jun 15, 2010
    Last edited by a moderator: Sep 7, 2017

Share This Page