Sinter Clutchdisc (Single Disc) | FerrariChat
Buy

Sinter Clutchdisc (Single Disc)

Discussion in '348/355' started by Samy, Oct 8, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Samy

    Samy Formula Junior

    Dec 2, 2005
    603
    #1 Samy, Oct 8, 2009
    Hello,

    i'm looking for a clutchdisc with sintermetalic pads suitable for the single disc clutch pressure plate from the stock 348 clutch. It must be a solid disc with 4, 6 , 8 or 10 sinter pads without holes arround the center spline hub like some clutches have because that would be too weak.

    Samy
     
  2. saw1998

    saw1998 F1 Veteran

    Jun 8, 2008
    8,237
    San Antonio, Texas
    Full Name:
    Scott
    #2 saw1998, Oct 8, 2009
    Last edited: Oct 8, 2009
    I'd contact Center Force Clutch. If they don't have it, they'll fabricate it. Tilton is also very good, although somewhat expensive.
     
  3. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,220
    Mount Isa, Australia
    Full Name:
    Pap
    #3 PAP 348, Oct 8, 2009
    Last edited by a moderator: Sep 7, 2017
    Something like mine Samy? :):)

    Ex-Fchatter Ferrarifixer made this one for me. :D:D

    He can also make single ones. If you're keen, let me know and I will pass on his contact details. :):)
    Image Unavailable, Please Login
     

Share This Page