Slave Cylinder. Anyone know where I can find one of these? | FerrariChat
Buy

Slave Cylinder. Anyone know where I can find one of these?

Discussion in 'Technical Q&A' started by enzo thecat, Jun 7, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. enzo thecat

    enzo thecat F1 Veteran
    Owner Rossa Subscribed

    Jan 27, 2008
    5,864
    Midwest
    Full Name:
    Enzo Thecat
    #1 enzo thecat, Jun 7, 2011
    Last edited by a moderator: Sep 7, 2017
    This is off a Superformance Cobra with a 351 Cleveland. We do not know the year of the car. Its the clutch slave cylinder. I was told it is a "windsor" slave cylinder, but I am not sure.

    Please look at the photo and see if you recognize the part and can tell me where to find one. I've searched everywhere I know with my limited ability.

    Thanks for your help!!!!!

    p.s. the number stamped in the side is "24288"
    Image Unavailable, Please Login
     
  2. 2NA

    2NA F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 29, 2006
    18,221
    Twin Cities
    Full Name:
    Tim Keseluk
    #2 2NA, Jun 7, 2011
    Last edited: Jun 7, 2011
    Shouldn't cost more than about $10 for a rebuild kit. Pull off the boot and measure the bore. Probably on the shelf somewhere locally. You might need to hone the bore (maybe another ($15-$20 for a brake cylinder hone).

    There's absolutely nothing magic there. You've probably done the hardest part already.
     
  3. chas-3

    chas-3 Formula 3
    Silver Subscribed

    Jan 28, 2009
    1,281
    Colorado
    Full Name:
    Chuck
    #3 chas-3, Jun 7, 2011
  4. PFSEX

    PFSEX Formula Junior

    Jun 30, 2006
    843
    Las Vegas
    Full Name:
    John Ratto
    #4 PFSEX, Jun 7, 2011
    Ford made 2 different 351 cubic inch engines - the Cleveland (higher performance) and the Windsor (lower pro).

    If you are correct, you have the higher pro engine but the clutch cylinder from the lower pro Windsor. Not that unusual in a Superformance.

    Check with Superformance first. They provide very good customer assistance.

    Or, just hone the cylinder a tiney bit (polish really) and find a rebuild kit at NAPA.
     
  5. It's Ross

    It's Ross Formula 3

    Jul 30, 2007
    2,028
    Barrington, Ill. USA
    Full Name:
    Ross
    #5 It's Ross, Jun 7, 2011
  6. enzo thecat

    enzo thecat F1 Veteran
    Owner Rossa Subscribed

    Jan 27, 2008
    5,864
    Midwest
    Full Name:
    Enzo Thecat
    #6 enzo thecat, Jun 7, 2011
    You guys are the best! Thanks!!!!
     

Share This Page