Soon to be complete 355 Conntector/Terminal List

I am building a connector and terminal list for the F355 5.2. I have started with the ECU harness first.

My public list is here at https://www.digikey.com/en/mylists/list/JUG6HGMZ1S.

So far, it includes the TE Metripack connectors and terminals and all of the Bosch EV1 style connectors, terminals, and connector boots, of which there are many on this harness.

Also note, the splashproof sealed 2 and 3 pin TE AMP Connectors are the proper choice here. Digikey stocks the black and grey versions, but other colors are difficult to find. The - # after the main part number designates the color of it. For example, part no. 282189-1 is the black 2 pin splash proof connector.

You will need brown, blue, black and grey. Brown is by far the hardest to find, so it may be best to keep them and replace the seals rather than replace the entire connector. The -1 is the color (black), -2 (grey), etc. You can click on "Base Product Number" and it will show you the color variation. For the 3 pin connectors, the blue is impossible to find, I have not been able to find it anywhere, so unless yours is cracked, I would not discard it. Just buy a black one and take out the seal and replace the seal in your blue one.

The weatherpack connectors which connect to the O2 sensors are not on this list as Digikey does not sell them. They can be bought here - https://www.customconnectorkits.com/collections/weather-pack-connectors/products/12015798.

I am looking for the terminals for the Bosch ECU connector. There are two sizes, but I am unable to find the proper ones. I need to replace all of mine as someone attempted to install the gold connector kit and did a very amatuerish job (that is being generous). I'll add that to the list as well as any other additions you all provide.

Thanks for your help!

Todd