Source for u nut/clip nut on heater valve? | FerrariChat
Buy

Source for u nut/clip nut on heater valve?

Discussion in '308/328' started by guygowrie, Nov 29, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    #1 guygowrie, Nov 29, 2015
    Replacing my heater control valve on my Gt4 and the clip nut that holds the cable to the control valve housing snapped in two.

    Any sources? I looked at Mcmaster Carr and my local hardware but you need a clip nut with a centering hole at the top and a bulge for the cable housing. Maybe a fiat part but I haven't been able to locate one so far.

    Any tips gratefully appreciated. Thanks
     
  2. antoninosavoca

    antoninosavoca Formula Junior

    Aug 9, 2011
    283
    Montesilvano Italy
    Full Name:
    antonino savoca
    #2 antoninosavoca, Nov 29, 2015
    Hi Guy , can you post a photo,i could try to find it
    ciao
    Antonino
     
  3. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    #3 guygowrie, Nov 29, 2015
    Last edited by a moderator: Sep 7, 2017
    Ciao Antonino!

    Poor photo but its slightly less than an inch
    Image Unavailable, Please Login
     
  4. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    #4 guygowrie, Nov 29, 2015
    Last edited by a moderator: Sep 7, 2017

Share This Page